RC-Lights ELECTRONIC BRAKE SWITCH

#5092: ELECTRONIC BRAKE SWITCH
Turns Tail lights into BRAKE-LIGHTS.

Eliminate those mechanical switches, replace them with an electronic solution that keeps working run after run. Fully functional with any R/C vehicle - NITRO or ELECTRIC! Auto-Adjusting ON point to accommodate any trim adjustments. Reversible for a wide range of applications. Quick and easy installation.

Installs in-line with throttle servo or ESC. Plug Electronic Brake Switch into throttle channel on RX (receiver); plug throttle servo or ESC into brake switch.

Power from the RX is supplied to the LED controller through the electronic brake switch.

DIP Switches - enable or disable these features
CENTER-STICK: Changes if the brake lights are at normal or full intensity at center-stick
REVERSIBLE: Changes which direction of the throttle trigger is ON

Use the 3 wire power plug with a LED controller for constant power to Bank #1 and dual-intensity power to Bank #2.

Discard 3 wire power plug or save for future use if using with a RX Direct2LED™, OR XTEC LED Lights.

INCLUDES
  Instruction Set
  (1) electronic brake switch
  (1) 3 wire power plug
  (2) zip ties & bases

Specification:
CURRENT DRAW (@6V): 1mA (10mA when output is switched on)
INPUT VOLTAGE: 4.0-6.0V
MAX OUTPUT CURRENT: 1.2A

Made in the USA