RC-Lights 10 LED Controller - Standard

#5051: 10 LED Controller - Standard
Directly power up to 10 LEDs. Current limiting resistors are built right in.

Using the 10 LED Controller, LEDs can be directly powered using a variety of power sources.

Used with electronic switches, LEDs can be split into two independently controllable banks - LED1-6 and AUX1-4.

Usually LED1-6 is used for constants - headlights, running lights, navigation lights. Leaving AUX1-4 for auxiliary lights - brake lights, landing lights.

With the jumper installed on the AUX channel AUX1-4 are constant ON and electrically exactly the same as LED1-6.

The LINK channels are exactly the same as the PWR channel and can be used to power the controller or link power with additional controllers.

Includes
  Instruction Set
  (1) standard 10 LED controller
  (1) RX plug
  (2) zip ties & bases

Secifications:
LED Controller
DIMENSIONS: 1.15" x 0.75" x 0.25"
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Controller pins can be directly soldered to for DIY projects. Use heat shrink to insulate each pin.

Made in the USA