RC-Lights NIGHTFLY™ 14 LED NAVIGATION SYSTEM [5MM, 14”/24"]

Due-in-stock 05/29

#5324: NIGHTFLY™ 14 LED NAVIGATION SYSTEM [5MM, 14”/24"]
Powered directly from the RX / ALL MOUNTING HARDWARE INCLUDED

Use RCL5324 to install 2 red & 2 green directional navigation lights; 2 white adjustable wingtip strobes; 2 white adjustable tail strobes; 2 red adjustable rotating beacon strobe lights; and 4 white landing lights (switched from the TX) to any 48" span R/C airplane, helicopter, or boat. Use wire extensions for larger scale craft.

Includes the NIGHTFLY™ 14 LED controller that can be switched on/off from the TX using a spare 2-position switch.

Everything needed for a complete installation is included with every lighting system!

Includes
  Instruction Set
  (1) #5056 NIGHTFLY™ 14 LED controller
  (1) 4P Power Plug
  (8) #5390-14 14" wire extensions
  (6) #5390-24 24" wire extensions
  (4) #5290-R 5mm red constant LED
  (2) #5290-G 5mm green constant LED
  (8) #5290-W 5mm white constant LED
  (14) #5081 5mm chrome LED hlders
  (14) #5082 standard 5mm LED holders
  (14) 2P connector housings
  (1) #5080 3.75"x3" aluminum tape
  (1) #5080 pre-cut aluminum tape
  (16) #5080 zip ties & bases

NOTE: NIGHTFLY™ 14 LED controller is not compatible with the Remote Power Switch (#5090).

Specifications:
SYSTEM CURRENT DRAW (@6V): 110mA with landing lights off; 170mA with landing lights on (A standard servo draws approx. 350mA) Run Time Loss Calculator

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.65" x 1.0" x 0.25"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

RC-Lights Quick Start Guide