RC-Lights 6 LED Add-On for RPM Roof Canisters [3MM, 14"]

#106A: 6 LED Add-On for RPM Roof Canisters [3MM, 14"]
This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL106A to add 6 3mm white LED lights to RPM Roof Canisters to any controller with 6 extra constant LED channels (see #104).



Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 & RPM80925 --Direct fit for Slash 4x4, Slash & SC10

To change LED sizes or colors use 5mm or 3mm LEDs.

This system add-on requires a LED controller and power source. Add-On for #104

If not used with #104 use with Standard 10 LED Controller #5051 or any other LED controller with available channels.

- BRIGHTEST LEDs INDUSTRY WIDE
- SIMPLE & EASY INSTALLATION
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
- LED ADD-ON (LED CONTROLLER REQ.)

Includes
Instruction Set
  (6) 14" wire extensions #5390-14
  (6) 3mm white LEDs #5280-W
  (6) 2P connector housings
  (2) zip ties #5080

Specifications:
TOTAL LED CURRENT DRAW (@6V): 110mA
(A standard servo draws approx. 350mA)

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

DIY HOBBYISTS: If connecting LEDs directly to power a current limiting resistor must be installed on each LED or it will blow and void the warranty. (160 ohm @ 6V)