MKS S311 Sub-Micro Coreless Digital Servo

INCLUDES
- MKS S311 Servo ID#S0005001
- Servo Horn Package, x1

Specifications:
• Dead Brand: 0.002ms (Default)
• Control System: +Pulse Width Control
• Working frequence: 1520μs / 333hz
• (RX) Required Pulse: 3.0 ~ 6.0 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8 ~ 6.0 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (4.8V): 0.140 sec/60° degrees at no load
• Operating Speed (6.0V): 0.120 sec/60° degrees at no load
• Stall Torque (4.8V): 1.28 kg.cm (17.8 oz/in)
• Stall Torque (6.0V): 1.62 kg.cm (22.5 oz/in)
• 360° Modifiable: NO
• Motor Type: High-Speed Coreless Motor
• Potentiometer Drive: Direct Drive
• Bearing: Single Ball Bearing
• Gear Type: Plastic
• Programable: YES

- Weight: 8.26g (0.219oz)
- Dimensions: 22X12X20.5 mm (0.87x 0.47x 0.81in)
- Connector Wire Length: 15.0cm (5.9in)




Why choose digital over analog?

1. Instantaneous Response
The digital microprocessor sends out signals five times faster than analog servos.
This results in a much quicker response.
2. Precision Resolution
There are many more steps in the digital format compared to the conventional
analog version. This means the servo is capable of finer adjustments.
3. Enormous Standing Torque
The standing torque of the digital servo is three times that of the analog counterpart.
Check it out, try moving the transmitter stick and at the same time hold the servo
horn to keep it from twisting. You will not be able to prevent the horn from turning.

Sub-Micro Servo	(4.8v)sec/60°	(6.0v)sec/60°	(4.8v) kg/cm	(6.0v)kg/cm
MKS S311 (4.8/5.0v)	0.14	0.12	1.28	1.62
Hitec HS-5055	0.20	0.17	1.3	1.6
JR DS285MG	0.18	0.14	1.2	1.4