Gazaur Mars 480 GF Kit

Gazaur Mars 480 GF Kit Classic
floating type rotor control module
Main Rotor Dia: 755-790mm

Frames Materials: Glass Fiber GF
(Made from CNC machined industrial fiberglass sheet)

INCLUDES
- Mars 480 GF Kit (80% Pre-Assembled) set
- 340mm Wooden Blades set (NACA type)

Specifications:

• Body Length: 715-755mm	• Belt Drive Gear: 39T, 41T
• Body Height: 230mm	• Tail Transmitting Gear: 30T/15T
• Main Rotor Dia: 755-790mm	• Gear Ratio: 15: 1: 1.39 / 13.63: 1: 1.39
• Tail Rotor Dia: 150mm	• Unloaded Weight: 470g
• Motor Gear: 10T, 11T (shaft 3.17mm)	• Flying Weight: 780-920g
• Main Gear: 150T

Additional Electronics Required:

• Brushless Helicopter Motor	• 9-28g Rudder Servo
• Heli ESC w/4A BEC	• Head-lock Gyro
• Lithium Polymer Battery	• 6+ CH Receiver
• 9-15g Micro Cyclic Servos (3)	• PCM Transmitter

Gazaur 480 Setup Suggestions:

	Sport 3D	Extreme 3D
Heli Motor	GL-8-4100Kv OR HK-2216-12	GL-7,9, HK-2221-6,8,10,12,1630,2010
Heli ESC	GL-55A-V1 OR 45A SBEC series	15V 60A-V2-ESC OR 26V 60A ESC SBEC
Battery	KP 11.1V/2200mAh/26C	KP2236-3, KP1836-4, KP1335-6
Pinion	8-motor 10-11T/ 12-motor 11-13T	9-motor 10T/ 7-motor 11-12T
Main Blades	320-350mm Blades	340-360mm CF Blades
Cyclic Servos (3)	HS-65HB/ HS-65MG	HS-65MG/ HS-5065MG
Head Lock Gyro	Hitec HG-5000/ Mini-G	Hitec HG-5000/ Mini-G
Rudder Servo	HSG-5083MG/ HSG-5084MG	HSG-5083MG/ HSG-5084MG
TX/RX	Optic 6 Sport/ DX-7/AR7000	Optic 6 Sport/ DX-7/AR7000

_________________________________________________________________________________



Secret of Very Stable Flight Characteristics of Mars and Poseidon:

Thanks to the patented CCPM Servo Control Base from Gazaur, three CCPM controlling servos are mounted accordingly to a layout of horizontal plane and geometric symmetry. The result is giving the distinguished and very stable flight characteristics to Mars and Poseidon.



Revolutionary Rotor Head Design

The rotor head system is the soul of a helicopter; traditional helicopter with washout design not only adds additional weight, it also adds cross-coupling problems. To give our helicopter a new soul, we designed a single body floating type rotor head system; this system has fewer parts, less weight and a more linear movement which greatly improves flight stability. _________________________________________________________________________________





Tail Speedup Gear Design

Although this design is heavier and uses more parts, a simple test can prove its value. If you hold the main rotor and turn the tail rotor with force, our belt will not skip tooth.

Ultra Low Belt Speed

Tail drive belt only turns 1.9 times when main rotor turns once. This ultra low belt speed design equal extend belt lifetime. (Calculated with MXL38T main belt drive gear and MXL 20T tail gear. 38/20=1.9)



Mars 480 manual 9.93mb pdf
right click "Save Target As"

view=slideshow.Slideshow&g2.