Accord-Hobby Q6 4x50W QUADPLAY DC MULTI-CHARGER

$99.99 qualifies for free Priority Mail® (2-3 days) shipping. Includes all 50 States, APOs and FPOs!

QUADPLAY Q6 - Four 50W Balance Chargers In One

INCLUDES
- AD-Q6 4x50W DC Balance Charger
- Operating Manual
- Five Kinds of wires (Crocodile clip, Futaba/JR TX/RX plug,
JST plug, Tamiya plug, 18AWG wire charging cable)
- Plug-in battery clamps
- JST TP/FP 2-6S Balance Adapter
- JST HP/PQ 2-6S Balance Adapter

SPECIFICATION:
• Input voltage: 11-18VDC
• Charge power: max. 50W x 4
• Discharge power: max. 5W x 4
• Charge current range: 0.1-5.0A per OUT
• Discharge current range: 0.1-1.0A per OUT
• Current drain for balancing LiPo: 250mAh/cell
• Balance tolerance: +/- 0.01V
• Data store: max. 5 data of batteries per OUT
• NiCd/NiMH battery cell count: 1-15 cells per OUT
• LiPo/LiIo/LiFe battery cell count: 1-6 series per OUT
• Pb battery voltage: 2V-20V per OUT
• Computer USB port: NO
• Temperature sensor port: YES

- Case: Aluminum
- Dimension: 220 x 150 x 55mm
- Weight: 1090g

Optimized user interface
When charging or discharging, ACCORDHOBBY AD-Q6 has an “AUTO” function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging that can lead to an explosion by user’s fault. Every program in the unit is controlled with mutual links and communication for every possible error for maximum safety. These can be set at user’s option. Special recharge plugs port for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc. It provides most convenient balance port for Lithium batteries, with separated 2,3,4,5,6 charge port, and external reverse connector.

High-power and high-performance circuit
ACCORDHOBBY AD-Q6 employs the circuit that has maximum output power of 50W x4. As a result it can charge or discharge up to 15 cells NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program. Individual voltage balance for Lithium batteries inside ACCORDHOBBY AD-Q6 as an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge
ACCORDHOBBY AD-Q6 also can monitor and balance individual cells of the Lithium battery pack during the discharge progress. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Suitable for various types of Lithium batteries
ACCORDHOBBY AD-Q6 can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer “Warnings and safety notes” section. Lithium battery “Fast” and “Storage” mode You can charge Lithium battery for special purposes. “Fast” charge reduces the charging time of Lithium battery and “Storage” mode controls the final voltage of the battery to be suit for long time storage.

Maximum safety
Delta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.
Auto-charge current limit: when charging Nicd or NiMH at “AUTO” current mode, you can set the upper limit of charge current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in “AUTO” mode.
Capacity limit: the charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Temperature limit: (using optional thermal sensor) The temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.
Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.
Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.

Data store/load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging
Perform 1 to 5 of charge/discharge or discharge/charge continually for battery refreshing and balancing.

Built-in dual fans and higher heat sink performance lead to super cool effect.



Multi-use wires
Five kinds of Wires, Two Adapters, and an Operating Manual are provided with the ACCORDHOBBY AD-Q6 charger. You can charge and discharge your battery easily with these wires.